Tripp Lite series SM1500RMXL2UTAA Line-interactive UPS - Tripp Lite by Eaton UPS TAA SmartPro 120V 1.5kVA 1.35kW Line Interactive Sine Wave UPS 2U Extended Run Network Card Options LCD USB DB9 1500VA/1350W 4.9 Minute Full Load 8 x NEMA 5 15R

• Plug/Connector Type:
  NEMA 5-15P
  
• Receptacle Type:
  NEMA 5-15R
  
• Receptacle Detail:
  8 x NEMA 5-15R
  

• Load Capacity (VA):
  1500 VA
  
• Load Capacity (Watt):
  1350 W
  
• Input Voltage:
  110 V AC
  
• Input Current:
  10.10 A
  
• Output Voltage:
  120 V AC
  

• Network Management:
  SNMP Manageable
  

• Serial Port:
  Yes
  
• USB:
  Yes
  

• Backup/Run Time (Full Load):
  4.90 Minute
  
• Backup/Run Time (Half Load):
  14 Minute
  
• Hot Swappable:
  Yes
  
• Typical Battery Recharge Time:
  4.50 Hour
  

• Height:
  3.50"
  
• Width:
  17.50"
  
• Depth:
  13.50"
  
• Rack Height:
  2U
  
• Form Factor:
  Rack/Tower
  
• Weight (Approximate):
  43.50 lb
  

• Software Included:
  PowerAlert Software
  
• Country of Origin:
  Taiwan
  
• TAA Compliant:
  Yes
  
• Environmentally Friendly:
  Yes
  
• Environmental Compliance:
  Restriction of Hazardous Substances (RoHS)
  

Output
Output Volt Amp Capacity (VA) : 1500
Output kVA Capacity (kVA) : 1.5
Output Watt Capacity (Watts) : 1350
Output kW Capacity (kW) : 1.35
Output Capacity Details : Output is reduced to 1200 watts maximum when used with external battery packs
Power Factor : 0.9
Nominal Output Voltage(s) Supported : 110V 115V 120V
Nominal Voltage Details : 120v nominal output in battery mode
Frequency Compatibility : 60 Hz
Output Voltage Regulation (Line Mode) : -14 percent, +6 percent
Output Voltage Regulation (Battery Mode) : +/- 5 percent
Output Receptacles : (8) 5-15R
Load Management Receptacles : Two switchable two-outlet 5-15R load banks
Output AC Waveform (AC Mode) : Sine wave
Output AC Waveform (Battery Mode) : Pure Sine wave
input
Rated input current (Maximum Load) : 12A
Nominal Input Voltage(s) Supported : 120V AC
UPS Input Connection Type : 5-15P
Input Circuit Breakers : 15A
UPS Input Cord Length (ft.) : 10
UPS Input Cord Length (m) : 3
Recommended Electrical Service : 15A 120V
Input Phase : Single-Phase
Battery
Full Load Runtime (min.) : 4.9 min. (1350w)
Half Load Runtime (min.) : 14 min. (675w)
Expandable Battery Runtime : Extended runtime supported via optional external battery packs
External Battery Pack Compatibility : BP36V15-2U(limit 1) BP36V42-3U(multi-pack compatible) BP36V27-2US(multi-pack compatible)
DC System Voltage (VDC) : 36
Battery Recharge Rate (Included Batteries) : Less than 4.5 hours from 10 percent to 90 percent
Internal UPS Replacement Battery Cartridge : RBC93-2U
Battery Access : Front panel battery access door
Battery Replacement Description : Hot-swappable, user replaceable batteries
Expandable Runtime : Yes
Voltage Regulation
Voltage Regulation Description : Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction : Input voltages between 127 and 145 are reduced by 12 percent
Undervoltage Correction : Input voltages between 95 and 108 are boosted by 12 percent
Severe Undervoltage Correction : Input voltages between 83 and 94 are boosted by 24 percent
Front Panel LCD Display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options)
Switches
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
Alarm Cancel Operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch silent mode alarm configuration option available
Audible Alarm
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
UPS AC Suppression Joule Rating
570
UPS AC Suppression Response Time
Instantaneous
EMI / RFI AC Noise Suppression
Yes
Included Mounting Accessory Description
Adjustable mounting rail kit included
Installation Form Factors Supported with Optional Accessories
2 post rackmount(2POSTRMKITWM) Wallmount(2POSTRMKITWM) Tower(2-9USTAND) 2-4 post front rail rackmount(UPSHDEARKIT)
Primary Form Factor Rackmount
Rackmount
ENVIRONMENTAL
Operating Temperature Range : +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range : +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity : 0 to 95 percent, non-condensing
AC Mode BTU / Hr. (Full Load) : 237
AC Mode Efficiency Rating (100 percent Load) : 95 percent
Communications
Communications Interface : USB (HID enabled) DB9 Serial EPO (emergency power off) Slot for SNMP/Web interface
Network Monitoring Port Description : Supports detailed monitoring of UPS and site power conditions
PowerAlert Software : Included
Communications Cable : USB and DB9 cabling included
WatchDog Compatibility : Supports Watchdog application, OS and hard-reboot restart options for remote applications
Network UPS Tools Compatibility : NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.htmlmanufacturerTripp Lite
Line / Battery Transfer
Transfer Time : 4 milliseconds (AC to battery mode), 1 millisecond (Battery to AC mode)
Low Voltage Transfer to Battery Power (Setpoint) : 83
High Voltage Transfer to Battery Power (Setpoint) : 145
Special Features
Grounding Lug : Back panel grounding lug
Cold Start (Startup in Battery Mode During a Power Failure) : Cold-start operation supported
High Availability UPS Features : Hot swappable batteries
Green Energy-Saving Features : Greater than 95 percent efficiency - GREEN UPS Individually controllable load banks
Certifications
UPS Certifications Tested to UL1778 (USA) Tested to CSA (Canada) Tested to NOM (Mexico) Meets FCC Part 15 Category B (EMI) ROHS (Restriction of Hazardous Substances) TAA Compliant
Item Dimension (L inchxW inchxH inch)
9 x 24 x 21

Weight
51.30lb

Warranty Information
2-year limited warranty