Tripp Lite series PDUMH20HVAT PDU - Tripp Lite by Eaton 3.8kW Single Phase Local Metered Automatic Transfer Switch Two 200 240V C20 Inlets 8 C13 & 2 C19 Outputs 1U TAA 2 x IEC 60320 C19, 8 x IEC 60320 C13 200 V AC

Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.

Product Description

Technical Information

Plug/Connector Type:
IEC 60320 C20
Plug/Connector Detail:
2 x IEC 60320 C20
Receptacle Type:
IEC 60320 C13, IEC 60320 C19
Receptacle Detail:
8 x IEC 60320 C13, 2 x IEC 60320 C19

Power Description

Input Voltage:
230 V AC
Input Voltage Range:
200 V AC - 240 V AC
Output Voltage:
240 V AC, 230 V AC, 220 V AC, 208 V AC, 200 V AC

Physical Characteristics

Color Family:
Black
Product Color:
Black
Mount Type:
Rack-mountable
Rack Height:
1U
Height:
1.7"
Width:
17.3"
Depth:
14"
Weight (Approximate):
10.30 lb

Miscellaneous

Country of Origin:
Taiwan
TAA Compliant:
Yes
Environmentally Friendly:
Yes
Environmental Compliance:
Restriction of Hazardous Substances (RoHS)

PDU Type
Auto-Transfer Switch Metered
Output Capacity Details
3.84kW (240V), 3.68kW (230V), 3.52kW (220V), 3.33kW (208V), 3.2kW (200V) / 16A total capacity 16A max per C19 outlet 12A (10A CE) max per C13 outlet
Frequency Compatibility
50 / 60 Hz
Output Receptacles
(8) C13, (2) C19
Output Nominal Voltage
200, 208, 220, 230, 240
Overload Protection
n/a
Outlet Type
IEC-C13, IEC-C19
PDU Input Voltage
200, 208, 220, 230, 240
Recommended Electrical Service
20A 208/240V 16A 230V
Maximum Input Amps
20
Maximum Input Amps Details
Agency de-rated to 16A continuous
PDU Plug Type
IEC-320 C20
Input Cord Length (m)
3.6
Input Phase
Single-Phase
Front Panel LCD Display
Digital display reports total PDU output current in amps
Front Panel LEDs
8 front panel LEDs display power on/off status for each C13 outlet, plus 2 LEDs for power status on Primary and Secondary input connection
Switches
Toggle switch near digital display enables the setting of "HI" for 220, 230 or 240V nominal applications or "LO" for 200 or 208V applications
Material of Construction
Metal
Form Factors Supported
1U rackmount
PDU Form Factor
Horizontal (1U, 2U, etc)