0
Categories
Tripp Lite series N784-H01-SCMM Transceiver/Media Converter - Eaton Hardened Copper to Fiber Media Converter 10/100 Mbps, RJ45/SC Multimode, 10° to 60°C, 2 km (1.2 mi.), TAA 1 x Network (RJ 45) 1 x SC Ports DuplexSC Port Multi mode Fast Ethe

Tripp Lite series N784-H01-SCMM Transceiver/Media Converter - Eaton Hardened Copper to Fiber Media Converter 10/100 Mbps, RJ45/SC Multimode, 10° to 60°C, 2 km (1.2 mi.), TAA 1 x Network (RJ 45) 1 x SC Ports DuplexSC Port Multi mode Fast Ethe

Features | Extends a Network Connection up to 2 km over SC Multimode Fiber Optic Cable

This network media converter converts a copper Ethernet signal to a multimode fiber optic signal and extends it to a second network device up to two kilometers (1.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N784-H01-SCMM with multimode fiber cable to reach hubs, switches and other 10/100Base-TX/FX network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.

Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.

LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.

Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.

Works in Tandem with Tripp Lite's N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N784-H01-SCMM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.

TAA-Compliant for GSA Schedule Purchases
The N784-H01-SCMM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Manufacturer: Tripp Lite series SUPPORT
MPN: N784-H01-SCMM
Availability: Special Order
Condition: New
$173.58
Add to Wishlist

Product Description

Interfaces/Ports
  • Total Number of Ports:
    2
  • Network (RJ-45):
    Yes
  • Number of Network (RJ-45) Ports:
    1
  • Number of SC Ports:
    1
  • SC Port Type:
    Duplex
Media & Performance
  • Media Type Supported:
    Twisted Pair, Optical Fiber
  • Fiber Mode Supported:
    Multi-mode
  • Fiber Optic Cable Wavelength:
    1310 nm
  • Maximum Distance Supported:
    2 km
Network & Communication
  • Ethernet Technology:
    Fast Ethernet
  • Network Technology:
    10/100Base-TX, 100Base-FX
Power Description
  • Power Source:
    AC Adapter
  • Power Consumption:
    1.80 W
  • Plug/Connector Type:
    NEMA 1-15P
Physical Characteristics
  • Form Factor:
    Wall Mountable, DIN Rail Mountable, Desktop
  • Height:
    0.9"
  • Width:
    2.9"
  • Depth:
    4.3"
  • Weight (Approximate):
    8.43 oz
Miscellaneous
  • Environmentally Friendly:
    Yes
  • Environmental Compliance:
    Restriction of Hazardous Substances (RoHS), Waste Electrical and Electronic Equipment Directive (WEEE)
  • Country of Origin:
    Taiwan
  • TAA Compliant:
    Yes