Synology SA3610 NAS Storage System - 1 x Intel Xeon D 1567 Dodeca core (12 Core) 2.10 GHz 12 x HDD Supported 1740.80 TB Supported HDD Capacity 0 x HDD Installed 12 x SSD Supported 1740.80 TB Supported SSD Capacity 0 x SSD Installed 16 GB RAM

• Number of Hard Drives Supported:
  12
  
• Number of Hard Drives Installed:
  0
  
• Total Hard Drive Capacity Supported:
  1740.80 TB
  
• Number of Solid State Drive Supported:
  12
  
• Number of Solid State Drive Installed:
  0
  
• Total Solid State Drive Capacity Supported:
  1740.80 TB
  

• Number of Processors Installed:
  1
  
• Processor Manufacturer:
  Intel
  
• Processor Type:
  Xeon
  
• Processor Model:
  D-1567
  
• Processor Core:
  Dodeca-core (12 Core)
  
• Processor Speed:
  2.10 GHz
  

• Standard Memory:
  16 GB
  
• Memory Technology:
  DDR4 SDRAM
  

• Ethernet Technology:
  10 Gigabit Ethernet, Gigabit Ethernet
  

• Number of Total Expansion Bays:
  12
  
• Number of 2.5"/3.5" Bays:
  12
  
• Total Number of Expansion Slots:
  2
  
• Expansion Slot Type:
  PCI Express 3.0 x8
  

• Controller Type:
  Serial ATA
  
• RAID Supported:
  Yes
  
• RAID Levels:
  0, 1, 5, 6, 10, Basic, JBOD, RAID F1
  

• Total Number of USB Ports:
  2
  
• Number of USB 3.2 Gen 1 Ports:
  2
  
• Network (RJ-45):
  Yes
  
• Number of Network (RJ-45) Ports:
  6
  

• Operating System:
  DiskStation Manager
  

• Protocols:
  SMB, AFP, NFS, FTP, WEBDAV, CIFS/SMB, SMB 2.0, SMB 3.0, NFSv3, NFSv4, NFSv4.1, iSCSI, HTTP, HTTPS, SNMP, LDAP, CalDAV
  

• Maximum Power Supply Wattage:
  550 W
  

• Height:
  3.5"
  
• Width:
  19"
  
• Depth:
  28.5"
  
• Form Factor:
  Rack-mountable
  
• Rack Height:
  2U
  
• Weight (Approximate):
  31.97 lb
  

Hardware Specifications
CPU
CPU Model
Intel Xeon D-1567
CPU Quantity
1
CPU Architecture
64-bit
CPU Frequency
12-core 2.1 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)
Yes
Memory
System Memory
16 GB DDR4 ECC RDIMM
Memory Module Pre-installed
16 GB (16 GB x 1)
Total Memory Slots
4
Maximum Memory Capacity
128 GB (32 GB x 4)
Notes
Synology reserves the right to replace memory modules with the same or higher frequency based on suppliers product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
Installing memory modules with differing capacities is not recommended. Check the Hardware Installation Guide of your Synology product for recommended memory configurations.
Storage
Drive Bays
12
Maximum Drive Bays with Expansion Unit
96 (RX1222sas x 7)
Compatible Drive Type
3.5" SAS HDD
2.5" SAS SSD
3.5" SATA HDD
2.5" SATA SSD
Hot Swappable Drive
Yes
Notes
It is strongly recommended that you only install drives listed on your devices compatibility list. Storage pool and volume creation processes may fail when using unverified drives. Synology is unable to provide technical support for devices using unsupported components.
"Compatible drive type" indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
External Ports
RJ-45 1GbE LAN Port
4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port
2 (with Link Aggregation / Failover support)
Out-of-Band Management LAN Port
1
Max. number of LAN ports
15
USB 3.2 Gen 1 Port
2
Expansion Port
1
Notes
This devices 1GbE LAN ports have a maximum transmission unit (MTU) size of 1,500 bytes.
The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.
PCIe
PCIe Expansion
2 x Gen3 x8 slots (x8 link)
File System
Internal Drives
Btrfs
EXT4
External Drives
Btrfs
EXT4
EXT3
FAT
NTFS
HFS+
exFAT
Appearance
Form Factor (RU)
2U
Rack Installation Support
4-post 19" rack (Synology Rail Kit - RKS-02)
Notes
The rail kit is sold separately
Others
System Fan
80 mm x 80 mm x 4 pcs
Fan Speed Mode
Full-Speed Mode
Cool Mode
Quiet Mode
Easy Replacement System Fan
Yes
Power Recovery
Yes
Noise Level
49.8 dB(A)
Scheduled Power On / Off
Yes
Wake on LAN / WAN
Yes
Power Supply Unit / Adapter
550 W
Redundant Power Supply
Yes
AC Input Power Voltage
100V to 240V AC
Power Frequency
50/60 Hz, Single Phase
Power Consumption
137.54 W (Access)
58.23 W (HDD Hibernation)
British Thermal Unit
469.30 BTU/hr (Access)
198.68 BTU/hr (HDD Hibernation)
Notes
For more information on how power consumption is measured, refer to this article.
Noise testing was conducted with the Synology system fully installed with Synology SATA SSDs and in an idle state. Two G.R.A.S. type 40AE microphones were placed at a 1 m distance from the front and rear of the device. Background noise: 16.49-17.51 dB(A) Temperature: 24.25-25.75C Humidity: 58.2-61.8%.
Temperature
Operating Temperature
0^oC to 35^oC (32^oF to 95^oF)
Storage Temperature
-20^oC to 60^oC (-5^oF to 140^oF)
Relative Humidity
5% to 95% RH
Certification
FCC
CE
BSMI
VCCI
RCM
UKCA
EAC
CCC
KC
UL
Environment
RoHS Compliant
Packaging Content
Main Unit X 1
Accessory Pack X 1
AC Power Cord X 2
Quick Installation Guide X 1
Optional Accessories
DDR4 ECC RDIMM: D4ER01-16G/D4ER01-32G
Expansion Units: RX1222sas
3.5" SAS HDD: HAS5300
3.5" SATA HDD: HAT5300
2.5" SATA SSD: SAT5210
M.2 SSD and 10GbE Combo Adapter Card: E10M20-T1
M.2 SSD Adapter Card: M2D20
25GbE Network Interface Card: E25G21-F2
10GbE Network Interface Card: E10G21-F2/E10G18-T2/E10G18-T1
Rail Kit Sliding: RKS-02
Surveillance Device License Pack
Notes
Installing memory modules with differing capacities is not recommended. Check the Hardware Installation Guide of your Synology product for recommended memory configurations.
Item Dimension (L"xW"xH")
33 x 23 x 9

Weight
50 lbs

Warranty Information
5-year