Cudy NT POE10 10 100 1000Mbps PoE+ Extender IEEE802.3af at Retail

Model Version
POE10 2.0
Protocols
802.3 Protocols
802.3i 10 Mbps over Twisted Pair
802.3u 100 Mbps over Twisted Pair
802.3ab 1 Gbps over Twisted Pair
802.3x Flow Control
802.3af PoE
802.3at PoE
PoE
Uplink Stream
1x GbE, 802.3at/af

Uplink PIN Assignment
Mode A / Mode B

Downlink Stream
1x GbE, 802.3at/af

Downlink Pin Assignment
Mode A

Transimission Distance
Cat. 5e or higher cable: 100 meters at Gigabit
Cat. 5e or higher cable: 250 meters at 10 Mbps
Note: Distance from extender to switch depends on switch capability. Distance from extender to device follows extender rating

Transimission Distance Note
250-meter transmission is only available under the Long-Range mode.
Interfaces
Physical Buttons
High-Speed/Long-Range DIP Switch

LED
PoE Status of Each PoE Port
Link/ACT of Each Ethernet Port

Power Interfaces
PoE via Ethernet Port
Power
Power Methods
802.3at/af PoE

Other Input Requirements
is more than or equal to 30W is recommended

Max Power Output
30W

Max Power Output Note
The actual power output depends on input

Max Power Consumption (W)
2W
Reliability
Power Protection
Polarity Protection
Overvoltage Protection
Short-Circuit Protection

EMC
IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV, Air: 8kV
IEC/EN 61000-4-5, Level 3 Surge: RJ45: CM 2kV

Environment
Ambient Operating Temperature: 0 to 40 ^oC (32 to 104 ^oF)
Storage Temperature: -40 to 70 ^oC (-40 to 158 ^oF)
Operating Humidity: 10% to 95% non-condensing
Storage Humidity: 5% to 95% non-condensing
Certifications
FCC, CE
Mechanical
Install in a Daisy Chain
Up to 3 extenders in a chain

Installation
Desktop
Wall-mount

Casing Material
Plastic
Package Content
POE10
Mounting Kit
Installation Guide
Item Dimension (L inchxW inchxH inch)
6 x 3 x 2

Weight
1.00 lb

Warranty Information
2 years