APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and individual outlet power metering Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment and to avoid unauthorized use of individual outlets Power sequencing delays allow users to define the order in which to power up or down attached equipment Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding Current metering provides real-time remote monitoring of connected loads Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles User-defined alarms warn of potential circuit overloads before critical IT failures occur Users can access, configure, and control Switched rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager
Protocols:
Main
Main Input Voltage
3 phase
Main Output Voltage
208 V
Input Connection Type
NEMA L21-20P
number of rack unit
0U
Cable length
6 ft (1.83 m)
number of cables
1
Provided Equipment
CAN Port Terminator
Installation guide
Rack Mounting brackets
Safety guide
Serial configuration cable
Physical
Color
Black
Mounting Location
Side
Mounting preference
No preference
Mounting Mode
Rack-mounted
USB compatible
No
Input
Line Rated Current
16 A
Max line current
20 A
Input current limits
20 A
Load Capacity
5700 VA
Input Frequency
50/60 Hz
Output
number of power socket outlets
21 IEC 60320 C13
3 IEC 60320 C19
Conformance
Product Certifications
CUL Listed
UL Listed
VCCI Class A
Standards
FCC Part 15 class A
ICES-003
Environmental
Ambient air temperature for operation
23...140 oF (-5...60 oC)
Relative Humidity
5...95 %